Turnbuckle Hardware Eye and Eye DIN 1480

Material: Malleable / Carbon / Stainless Steel
Type: Eye / Hook / Jaw
Size: M6-M48
Surface: Galvanized
Process: Forged / Casting
Packing: Cartons or Gunny Bags and then on Pallets.

Send Inquiry

TURNBUCKLE HARDWARE

Turnbuckle hardware refers to the various components that make up a turnbuckle assembly. A turnbuckle is a device used to adjust the tension or length of ropes, cables, or wires in a mechanical system. It typically consists of a body with left-hand and right-hand threaded ends, allowing for easy adjustment by simply rotating the central body.

eye and eye turnbuckle-din 1480-Qingdao Kailipu

DIMENSIONS:

END TYPES OF TURNBUCKLE HARDWARE

Turnbuckles can have different end types or end fittings to suit various applications and connection requirements. The end types typically include the following:

1. Hook Ends: Turnbuckles with hook ends have a hook-shaped fitting on each end. These hooks can be use to attach the turnbuckle to an anchor point or other components in the system.

2. Eye Ends: Turnbuckles with eye ends have an eyelet or loop-shaped fitting on each end. These eye ends allow for easy connection of the turnbuckle to other components using pins, bolts, or other fasteners.

3. Hook and Eye Ends: Some turnbuckles may have a combination of a hook end on one side and an eye end on the other side. This provides flexibility in connecting the turnbuckle to different types of components.

4. Threaded Rod Ends: Turnbuckles with threaded rod ends have a threaded rod on each end. These rods can be directly screw into or connected with other threaded components.

5. Jaw Ends: Turnbuckles with jaw ends have a jaw-shaped fitting on each end. The jaws can be use to secure the turnbuckle to other components or attachments.

6. Jaw and Eye Ends: Turnbuckles with jaw and eye ends have a jaw and eye fitting on each end. The jaw can accommodate pins, bolts, or other fasteners to connect with other components.

Common Uses of Turnbuckle Hardware

1· Tensioning of cables and wires in fences, railings, and suspension bridges.
2· Supporting and adjusting the tension of sails in sailboats.
3· Tightening guy wires for telecommunications or radio towers.
4· Maintaining tension in overhead lines for electricity distribution.
5· Adjusting tension in netting and other types of fabric or mesh.

Turnbuckle Forged vs Malleable

Turnbuckle is a kind of rigging hardware which is widely use. As you can see, there are two types which are forged and malleable steel types. The two have the same size and configuration, but the production process and raw materials are different.

First of all, malleable steel turnbuckles are cast by Masteel. And the forged type turnbuckle is forged from round carbon steel. Forging can eliminate defects such as as-cast porosity produced in the metal smelting process, while preserving the complete metal flow line. Therefore, the mechanical properties of the forged turnbuckle are better than those of the malleable steel turnbuckle with the same specification. But in terms of price, DIN 1480 Malleable turnbuckle has a greater advantage. So we can make the right choice from the combination of performance and price when purchasing.

Professional Turnbuckle Supplier in China

Kailipu is a professional turnbuckle supplier and manufacturer in China. We supply hundreds of high-quality turnbuckles. For any more help, e-mail our specialists at [email protected] for assistance.