————————————Shakcles————————————
a. Shackles
a. Shackles
a. Shackles
a. Shackles
a. Shackles
a. Shackles
a. Shackles
a. Shackles
a. Shackles
a. Shackles
a. Shackles
a. Shackles
a. Shackles
a. Shackles
a. Shackles
a. Shackles
a. Shackles
a. Shackles
a. Shackles
d. Marine Chain
d. Marine Chain
d. Marine Chain
Lugless Joining Shackle – Kenter Link – End Shackle -Swivel Set
a. Shackles
a. Shackles
a. Shackles
Professional Shackle Supplier in China
We are one of the professional shackle suppliers in China. And we manufacture US Crosby shackles and European shackles for the most. Among them, the G209, G210, G2130, G2150, European Large D are the most representative. Also our specifications range from 0.33 tons to 300 tons, which covers almost all sizes you will need.
Shackles belong to our rigging hardware series. They provide a simple and efficient solution for connecting chains, cables and lifting slings. As it is the most commonly used hardware for riggings. So it is widely used in the lifting industry.
Kailipu supplies hundreds of high-quality shackles. We have a full production line. Not only can produce the standard type, but also do custom production. If you are looking for a professional shackle supplier, do not hesitate to contact us.
Related Categories
High Quality Shackle Suppliers/Manufacturer/Exporter in China-Qingdao Kailipu Rigging & Lifting
FAQ
Working Load Limit (WLL) is the maximum working load designed by the manufacturer. This load represents a force that is much less than that required to make the lifting equipment fail or yield. People usually calculate WLL by dividing MBL by a safety factor (SF).
The factor of safety is the minimum force the shackle must be able to withstand before breaking. It is expressed as the ratio of minimum breaking load (MBL) to the working load limit (WLL) of the shackle.
The surface treatment of shackle: Hot galvanized/Electro-galvanized/plastic spraying.
Hot-dip galvanized: thick zinc layer, strong corrosion resistance, high price.
Electro-galvanized: the zinc layer is thin, the corrosion resistance is poor, and the price is low.
We usually size the shackle according to the diameter of the bow section rather than the pin size.
The diameter of each specification has its corresponding working load. The working load limit (WLL) is usually expressed in tons. For details, please refer to our product details page.
