Weld-on pivoting link / Grade 80 Weld on Lifting Point

S-265 Pivot Link
Approved for overhead lifting
Design Factor 4:1
Forged Steel- Quenched and Tempered
Painted finish.

Send Inquiry

Grade 80 Weld on Lifting Point

WLL	Dimension(mm)						Weight
(t)	A	B	D	E	F	L	(kg)
1.12	36	40	11	67	42	35	0.28
2	37	42	13	73	45	37	0.39
3.15	41	45	16.5	80	47	40	0.62
4	43	48	18	83	51	45	0.75
5.3	61	55	22	97	53	50	1.4
8	63	70	25	120	73	64	2.3
15	89	97	33	163	92	90	5.5

Number of legs	1	2	1	2	2	2	2	3-4	3-4	3-4
Load directions	0°	0°	90°	90°	0-45°	45-60°	unsymm	0-45°	45-60°	unsymm
Size(t)
1.12	1.12	2.24	1.12	2.24	1.5	1.12	1.12	2.3	1.6	1.12
2	2	4	2	4	2.8	2	2	4.2	3	2
3.15	3.15	6.3	3.15	6.3	4.4	3.15	3.15	6.6	4.7	3.15
5.3	5.3	10.6	5.3	10.6	7.4	5.3	5.3	11.2	7.9	5.3
8	8	16	8	16	11.3	8	8	16.9	12	8
15	15	30	15	30	21	15	15	31.8	22.5	15
4	6	8	4	8	5.6	4	4	8.4	6	4

WARNING:

Loads may disengage from link if proper welding,assembly, and lifting procedures are not used.
A falling load may cause serious injury or death.
Do not use with damaged slings or chain. For sling inspection criteria see ASME B30.9.
Read and understand these instructions before welding on, or using the pivoting link.

Grade 80 Weld on Lifting Point Inspection / Maintenance:

Always inspect before use.
Regularly inspect weld-on pivoting link parts (Figure 3).
Never use weld-on pivoting link that shows signs of corrosion, wear or damage.
Never use weld-on pivoting link if bail is bent or elongated.
Do not use part showing cracks, nicks or gouges.
Always make sure there are no spacers used between
weld-on pivoting link and the mounting surface.
Always be sure workpiece surface is in total contact with the
weld-on pivoting link base mating surface.
Always inspect the weld-on pivoting link bail and base for wear.
A visual periodic inspection of the weld should be performed. Check the weld visually, or use a suitable NDE
method if required.

Kailipu-China supplier manufacturer of Grade 80 Weld on Lifting Point pivoting link

For any more help, e-mail our specialists at [email protected] for assistance.

Weld-on pivoting link / Grade 80 Weld on Lifting Point

WARNING:

Grade 80 Weld on Lifting Point Inspection / Maintenance:

Related products

Login